Connect with us:

You are here:Home > Laser Collimators > Advanced CT Laser Collimator
HOTECH Advanced CT Laser Collimator Patented
f o r C a s s e g r a i n T e l e s c o p e s
Innovations in simple and precision form for maximum accuracy
CT Collimation Breakthrough
Collimate Your Cassegrain Telescope
- Without using a star
- Indoor or outdoor - day or night
- Focus stays at final view setting
- Within focal distance from your telescope
- One-man operation
- Portable and simple to setup and use
- Works on CT, SCT, SN Mak, & RC
New developed co-alignment technique making the colllimation even easier at higher level of accuracy
- New instructional videos released
- Review the Updated User's Manual (described in Step 5)
- New articles released in Astronomy, Amateur Astronomy, and Astronomy Technology Today magazines.

"This is a very clever device. By using three perfectly aligned laser beams it simulates the parallel rays coming from a distant star. The beams then pass through the telescope twice to amplify any error in the entire system making even small miscollimation errors readily seen and fixed. David's done his homework on this one, coming up with a very ingenious answer to daytime collimation of an SCT."
Craig Stark, Ph. D. and Founder of Stark Labs & PHD Guiding

New Advanced CT Laser Collimator review from Astronomy Magazine by Amateur Astronomer Tom Trusock.
"The collimator did a consistently good job of aligning the optics in my scope. If you or your astronomy club are interested in getting the most out of your SCTs while saving valuable observing time, I recommend checking into this product.

Advanced CT Laser Collimator review from Amateur Astronomy Magazine
by Senior Astrophotographer Robert Reeves
"The device provides an unparalleled amount of data useful for tuning telescope optics, perform all the checks available, and revives my ailing telescope and transforms it from a near paper wright to a fantastic planetary imaging scope."

Advanced CT Laser Collimator review from Astronomy Technology Today
by Amateur Astronomer Rod Mollise "Uncle Rod."

Innovation brings Affortable and Portable Collimation into Reality
Since the invention of the Cassegrain Telescope in 1672 by the French sculptor Sieur Guillaume Cassegrain, the Cassegrain Telescope has evolved into various derivative designs such as the more popular Ritchey-Chrétien, Dall-Kirkham, Schmidt-Cassegrain, and Maksutov-Cassegrain. The designs have gained their popularity because of their compact and simple to produce a design. With different designs, star collimation is and has always been the only effective method to collimate for Cassegrain telescope owners.
Now, backyard astronomers have an alternative to achieve excellent collimation conveniently using the Advanced CT Laser Collimator. The Advanced CT Laser Collimator brings the collimating star to your telescope within arm reaching distance. With its short-range capability, you can perform collimation indoors - day or night - without being subjected to weather conditions. And best of all, this new collimator utilizes a clear and simple-to-read, large target display for the telescope alignment diagnostic. This large target display is positioned within a short focal distance of the telescope which allows you to collimate without guessing.
No Star Required to Collimate
To achieve an accurate star collimation, normally the amateur astronomer requires good seeing conditions with no cloud, no wind, stable temperature, no light pollution, a well-aligned telescope mount tracking system, telescope optical tube assemble (OTA) thermal equilibrium, and a good visible magnitude star. The visual quality of the referencing star is greatly affected by the prescribed factors most of which are all in God's hand as you can see in the photo. Adjusting the collimation is guessing game where you move between front and the back of the telescope adjusting the corresponding alignment screw and holding your breath peeping through a high magnification eyepiece referencing the concentricity of the unstable defocused image. This can be an incredibly frustrating experience.
An artificial star can never simulate a real star because it is impossible to collimate with the telescope focus set at infinity. After artificial star collimation, you will need to adjust your focus back to infinity to view a real star by moving the primary mirror to a different position. The distance the primary mirror has been adjusted can accumulate mechanical tolerance errors. For some of the mass produced SCTs, the “sticky baffle” on the primary mirror focusing mechanism may also cause mirror-flop. If a mirror-flop has ocurred, it will affect the alignment position which in turn will render the collimation useless. Ideally, It is best to collimate your optics at the same viewing focusing position without major optical displacements to correspond to the final view setting. The Advanced CT Laser Collimator can accomplish this task without all the possible accumulated errors.

The large target display on the Advanced CT Laser Collimator brings you a clear visual cue of three projecting laser dots as the alignment reference at a very comfortable visual distance providing an accurate axial alignment error diagnostic. And during the entire collimation process, no major focusing is needed, thus minimizing the possible accumulated errors from the focusing adjustments. The referencing adjustments are made by bringing the three discernable projected laser dots, projected on the target, into a concentric ring. No more peeping through the eyepiece looking for a changing, ambiguous star image. This alternative collimation method saves precious observing time by collimating the telescope and preparing the viewing programs at dusk or before dawn without the influences of the external environmental conditions.

Collimate Within Focal Distance From Your Telescope
The Advanced CT Laser Collimator does not require long focal distances to achieve high-accuracy collimation. Utilizing the installed flat mirror at the focal point (eyepiece location), the collimator lasers double-passes both your primary and secondary mirrors and magnifies the alignment errors to a higher accuracy level. In addition, it cuts the collimating distance in half achieving near-field alignment process. The collimator is stationed within your telescope's focal length directly in front of your telescope. Setting up for collimation, you will be standing between the telescope and the collimator aiming both the telescope and the collimator at each other. Then you will adjust the secondary mirror knob to bring the returning lasers on the same track. This is a very convenient one-man operation.

At a Fraction of the Cost of Wavefront Interferometer Technology
The state-of-the-art advanced laser optical alignment technology used in the Advanced CT Laser Collimator achieves the same rough alignment function of a costly large aperture interferometer commonly use in high-energy labs at a fraction of its cost.
The Advanced CT Laser Collimator uses three collimated lasers, evenly spaced apart, to sample large aperture optical elements in your telescope. The three parallel laser beams completely simulate the light path (flat-wavefront) from a distant star and pass through the entire telescope’s optical elements and reflect back to its target for a complete and accurate double-pass diagnostic reading of your telescope optical alignment. This innovative collimation technique and technology enables the amateur astronomer achieving far-field collimation as a near-field process.

Precision CNC Machined Panel and Components
This beautifully designed instrument is precision machined from a solid block of aero-space grade aluminum. It is then hardened and anodized to keep the entire mounted laser system thermally stable allowing you to achieve accurate collimation. The rigid, ultra thin profile, and light-weight design makes the unit portable and simple to setup and use.

Collimates All CT, SCT, Makustov, & RC
The Advanced CT Laser Collimator simulates a real distant star light path, and as a result it can collimate most telescopes which primarily rely on star collimation. The collimation technique can be implemented on any size telescope. The current production model is designed to collimate telescopes with a primary mirror greater than 7-1/5-inches and a secondary mirror obstruction diameter less than 6-1/2-inches. For other larger sized telescope, please email ([email protected]) or call us for custom sizes.
INTES MK-91 Celestron EdgeHD Takahashi FRC-300 Celestron CPC

"It works, and it does not require a lot of space. Hell, it hardly requires any space. It's nicely made ... and is less than some of us have got used to payin' for one more eyepiece. I give it two thumbs up..."
Rod Mollise, "Uncle Rod"

Excellent reference article and illustration on "C11 Mechanical Alignment & Collimation."
by amateur astronomer Marc Aragnou.

"We have used the HOTECH Advanced CT Laser Collimator on our CDK Telescope to set the initial primary to secondary collimation with good result. HoTech's elegant design and high quality construction allows for ease of setup and makes this an invaluable tool for collimating a Cassegrain Telescope."
Allan Keller, PlaneWave Instruments

"I heartily recommend this device to anyone, even seasoned "pros" as a way to collimate without wasting you previous night hours and to collimate at least as accurately as most star tests, and certainly a way to collimate in areas and during conditions where a star test would be impossible..." more
Bruce Prager, AstroSolutions LLC

See our Advanced CT Laser Collimator in action on videos.
Also see users' Testimonials and Reviews.
Due to the high demand, item will be deliver one week after order placed! Thank you for your support!
Sort By:
Page of 1
Advanced CT Laser Collimator for 2" Focuser
Advanced CT Laser Collimator for 2" Focuser

Advanced CT Laser Collimator: Includes a 2" Reflector Mirror and a Fine Adjustment Stage more info
Advanced CT Laser Collimator for 1.25" Focuser
Advanced CT Laser Collimator for 1.25" Focuser

Advanced CT Laser Collimator: Includes a 1.25" Reflector Mirror and a Fine Adjustment Stage more info
2" Reflector Mirror
2" Reflector Mirror

Additonal 2" Reflector Mirror for Advanced CT Laser Collimator more info
1.25" Reflector Mirror
1.25" Reflector Mirror

Additonal 1.25" Reflector Mirror for Advanced CT Laser Collimator more info